R/C Column 3.24

Strength Design of Free-Shape R/C Columns

l PRODUCTS & SERVICES l SLABS l R/C COLUMN l R/C BEAM l FOOTING l STRESS 2D l SPIRAL STAIRS l BEAM l SPAN l SLABS SUPPORT l

Analysis and design of reinforced concrete columns on biaxial bending and compression.

The R/C Column software can be used for design and analysis of load bearing capacity of rectangular, circular and free-shape, short or slender columns subjected to a combination of compression or tension and bending moments in both orthogonal directions. The increase of the bending moments due to slenderness is automatically included in the analysis.

The R/C Column software calculates the Safety Factor against load bearing capacity failure of a column defined by the user. A column is defined by the geometrical characteristics of the section, effective length, properties of steel and concrete, size and location of reinforcing bars, design axial load on compression, and design bending moments in both directions.

Key Features:

  Bi-axial bending in combination with compression or tension

  Rectangular, circular and free-shape sections

  M-N Interaction Diagram

  Short and Slender Columns

  Follows AS 3600 -2001

  Load magnification due to buckling

  Single figure adequacy assessment

  Struc Plus export  www.struc-plus.com

  Import from SLABS and STRAND7

  One page detailed print report (more...)

  Avanced Shear Design according AS 3600 and ACI 318-99