Col-ico.tif (1172 bytes)
BAMTEC - SLABS Col-ico.tif (1172 bytes)

Add-On Module for SLABS Software

BamtecLogo.jpg (5946 bytes)

Distributed by OneSteel Reinforcing   www.reinforcing.com.au

l PRODUCTS & SERVICES l SLABS l R/C COLUMN l R/C BEAM FOOTING l STRESS 2D l SPIRAL STAIRS l BEAM l SPAN l SLABS SUPPORT l


 

 

bamtec-03.gif (45446 bytes)

BAMTEC is the most efficient way to design and construct conventional reinforced concrete slab

 

BAMTEC - SLABS software is an optional add-on module to SLABS software. In combination with SLABS software and a CAD package the BAMTEC module offers a comprehensive design tool for a very efficient design of BAMTEC reinforcing carpets.

The major advantage of BAMTEC carpets is their flexibility to adjust to the required reinforcement intensity as prescribed by the design engineer.  By using BAMTEC carpets any bar spacing and a very small bar size, such as 10, can be implements easily. Also, the steel intensity might vary over different areas in the same slab. All this will result in a more efficient usage of the reinforcement, which will result in some saving of the total amount of steel. The usage of small bar sizes is especially significant when crack criteria governs the design.

All this benefits are emphasises by BAMTEC - SLABS design software, which provide a set of tool which will allow the design engineer to take advantage of all benefits of BAMTEC carpets.  Moreover, BAMTC module shortens and offer better control of the design procedure.

 

bamtec-01.gif (19223 bytes)

 

Developers, Builders and Design Engineers will all benefit from the usage of BAMTEC Reinforcing Carpets

 

bamtec-02.gif (9817 bytes)

 

Distributed by OneSteel Reinforcing  www.reinforcing.com.au


 

Last Update: 30/10/2003


INDUCTA Engineering , PO Box A2293, Sydney South, NSW 1235, Australia
tel: (02) 9267 0114, international tel: +612 9267 0114
fax: (02) 9267 0168, international fax: +612 9267 0168